Sensor Remote Expansion Device
The Sensor Remote Device provides analog sensing information that can be collected, used in making local decisions and then logged in PACOM VIGIL CORE. The Sensor Remote Device runs on OSDP communication. Up to 16 devices can be connected to an S1000 Controller.
Card Reader Interface Board
The Card Reader Interface Board or 2-Door Controller is connected via the encrypted OSDP bus. Each OSDP bus can connect up to 16 2-Door Controllers, expanding the S1000 card access capabilities up to 16 doors or 32 readers.
The board has built-in dual Wiegand with LEDs and buzzer connections, 2 normal relays, and 1 solid-state relay, which provides unlimited activation of strikes. There are 2 digital inputs. Each input is configurable to perform multiple functions, such as door contact, egress, and break glass with the same wiring.
Remote IO
The Remote IO supports onboard 8 analog/digital inputs, 2 relay outputs and 3 O/C outputs and 1 onboard door without any expansion cards. In addition, it has a built-in battery charger, Ethernet port, and 2 OSDP ports.
Audio Listen In Module
The PACOM Audio Module offers a complete audio solution for your needs; with the use of the Audio 4 Board and the Audio Converter Expansion Card.
The Audio 4 Board is connected via the encrypted OSDP bus to the S1000 Controller. Each board allows the connection of up to 4 analog microphones and 1 speaker. Interfacing with the Audio Converter Expansion Card, digital audio can be captured and communicated to PACOM VIGIL CORE. Multiple Audio 4 Boards can be added to the S1000 Controller, allowing up to a maximum of 16 audio devices to be connected to each controller.
Power Supply
The Power Supply services the optimum performance of the S1000 Controller and associated components. The Power Supply regulates load and protects against over-voltage, short circuit, over current and overheating.