PSTN Expansion Card
The SPG PSTN Telephone line card will add additional backup support for the S1000 panel allowing the panel to report over a telepohne line using both SPG and open protocols
6 Output Expansion Card
The SPG 6 Output card provides easy expansion for an S1000 controller, providing an additional 6 dry contact Relays all with N/O and N/C terminals available. Up to 3 of these cards can be installed on an S1000, expanding output capacity of an S1000 to 20 relay outputs and 3 O/C outputs.
Card Reader Interface
The SPG Card Reader Expansion card provides an easy expansion for an S1000 Smart Controller, providing additional control of up to 2 doors. The board has built-in dual Wiegand reader support for In/Out readers on the door and has 2 relay outputs. There is also 2 additional digital or analogue inputs software configurable that can be used for Break glass and Door contact functions. Wiegand inputs can be software programmed to have a pullup resistor for situations where the Wiegand inputs are driven by a voltage.
Dual Ethernet Expansion Card
The SPG Dual Ethernet expansion card provides additional Ethernet port for the S1000 Smart Controler using any of the three expansion slots.The expansion card also supports a three-port switch capability allowing the S1000 Controller to occupy one port automatically and two ports are available for other network-connected devices or routers.